Super Endo Crown Preparation Bur Kit

The Crown Preparation Bur kit is designed to offer speedy, simple, and accurate tooth preparation for a wide range of crown and bridge restorations, veneers, and Onlays.

Precise depth orientation grooves can be achieved easily with the specially designed depth cutting diamond points.

2 special “Tissue-Protective End-Cutting Burs” for shoulder preparation and finishing under gingival margins without injuring the soft tissue.

Features :-

• High-quality diamond burs.
• With silicon inside, to hold burs tightly.
• These points are hygienically organized in a Plastic bur block.

• 1 x 14 Burs in Superendo Crown Preparation Bur Kit

• Insert the instrument as deeply as possible into the chuck (Friction Grip).
• Set the handpiece at the required working speed before applying the instrument to the treated area.
• Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
• Activate water spray during the entire treatment (minimum 50 mL/min).
• Regulate water flow in case of water excess or shortage.
• It is recommended to use a dental dam.
• Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
• Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
• It is recommended to wear gloves and safety glasses.

Q. Can these burs be autoclaved ?

A. Yes, these burs indeed come in a packaging that can be autoclaved and the burs can be reused thereafter.

Q. What should I do to prevent instrument fracture ?

A. Avoid jamming or levering actions when rotating, as this increases the risk of instrument breakage. Never exceed the specified maximum speed. Avoid applying forces greater than the recommended values, as this could cause damage to the instrument and the treated area. Always Check for possible damages; dispose of oxydized, blunt and eccentric instruments.

Q. When to dispose these Crown Preparation Burs ?

A. Check for possible damages; dispose of oxydized, blunt and eccentric instruments.