Prevest Denpro Crysta Restorative Type 2 Glass Ionomer Cement Dental

• Glass Ionomer formulation
• No etching or bonding needed due to strong chemical adhesion
• Fluoride release
• High mechanical strength
• Excellent wetting properties
• Sharp-set characteristics
• Low solubility
• Long term clinical data.

Bio Glass Gold is a glass ionomer cement for restoration of primary teeth, core build-up and restoration of class III, V and limited class I cavities. This dental material has good adhesive bond properties to the tooth structure, allowing it to form a tight seal between the internal walls of the tooth.

• Allows minimal cavity preparation
• Less stress on margins and marginal seal
• Protects against secondary caries
• Promotes internal remineralization and surface strengthening
• Easier mixing and fast setting makes it easy to use
• Good colour match to tooth structure
• More durable, longer lasting restorations

Indications : Restoration of primary teeth, core build-up and restoration of class III, V and limited class l cavities

Contraindications : 1. Pulp Capping 2. In rare cases, the product may cause sensitivity to some persons. If such reactions are experienced, discontinue the use of product and refer to a physician.

• Powder : Fluoro alumina silicate glass
• Liquid : Polyacrylic acid liquid normal viscosity
• Shelf Life : 3 years from the date of manufacturing.
• Presentation : Powder 20g, Liquid 16ml
• Shade : A2
• Mixing Time : 35 sec
• Setting Time : 2 min

• 1 x 20 g Powder
• 1 x 16 ml Liquid
• 1 x Spoon
• 1 X Mixing Pad

• Shake the powder bottle well every time before use.
• Dispense one scoop of powder and two drops of liquid on to the mixing pad (The standard powder to liquid ratio is 0.19:0.07)
• With a plastic spatula, divide the powder into 2 equal parts.
• Mix the first portion with all of the liquid for 15 seconds, then mix the remaining portion with the paste formed for 20 seconds.
• The total mixing time should be 35 seconds. Transfer cement to the prepared tooth surface using suitable instrument and finish the restoration.
• Allow 1:30 min to 2:00 min for proper setting.

• Storage Conditions : Store at temperature between 10°C to 24°C. Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.