Nsk S-max M65 Internal Spray Straight Handpiece (Non-Optic)

Features
Internal spray system for efficient and precise cooling.
M65 Ceramic Bearings for enhanced durability and reduced weight.
Straight design for excellent maneuverability and access.
Stainless steel body for durability and corrosion resistance.
Compatible with various dental units and systems.
Bur stopper included for precise and controlled cutting.
Ergonomic grip for comfortable and secure handling.
High-speed performance with a maximum speed of 40,000 min-1.
DescriptionThe NSK S-max M65 Internal Spray Straight Handpiece (Non-Optic), is a cutting-edge dental tool designed to elevate your dental practice to new heights.Equipped with an internal spray system, the NSK S-max M65 ensures efficient and precise cooling during procedures. This advanced cooling mechanism helps maintain the optimal temperature of the bur, enhancing patient comfort and preventing overheating. With the straight design, this handpiece offers excellent maneuverability and access to hard-to-reach areas, allowing for precise and controlled dental work. The NSK S-max M65 Internal Spray Straight Handpiece (Non-Optic) features a stainless steel body, which not only adds durability but also provides resistance against corrosion. This ensures that the handpiece remains in top condition, even with frequent use and exposure to water and cleaning agents.
?Key Specifications

Gear Ratio: 1:1 Direct Drive?
Max Speed:?40,000 min-1
For:?For HP Burs (?2.35) / For CA Burs (?2.35)*
Water Spray:?Single Spray
Body Material:?Stainless Steel
Handpiece Connection Type: ISO 3964 Type 2

Packaging
1 X Straight Handpiece
Direction to Use
Connect the handpiece to the dental unit or air turbine using the appropriate coupling or connection type. Ensure a secure and stable connection.
If necessary, insert the supplied bur stopper into the handpiece to limit the bur’s insertion depth and ensure precise and controlled cutting.
Prior to starting the procedure, check the water supply and ensure that the water spray is functioning properly. Adjust the water flow and spray as needed for optimal cooling.
Hold the handpiece in a comfortable and secure grip, ensuring a firm but relaxed grasp. Position your hand and fingers for optimal control and maneuverability.
Before activating the handpiece, inform the patient about the upcoming procedure and ensure they are comfortable and prepared.
Start the handpiece by activating the foot pedal or control mechanism on the dental unit, following your standard operating procedures.
As you work, maintain a steady and controlled hand movement. The straight design of the handpiece allows for precise access to the treatment area.
Monitor the cooling effect of the internal spray system throughout the procedure. Ensure that the bur and surrounding area are adequately cooled to prevent discomfort and overheating.
Follow the recommended speed and pressure guidelines for the specific procedure and type of bur being used. Adjust the speed and pressure as needed for optimal results.
Periodically check the handpiece for any signs of overheating, unusual noises, or decreased performance. If any issues arise, stop the procedure and inspect the handpiece for potential problems.
After completing the procedure, deactivate the handpiece and release the foot pedal or control mechanism. Ensure that the handpiece is completely stopped before removing it from the treatment area.
Disconnect the handpiece from the dental unit or air turbine, following the appropriate disconnection procedure for your specific setup.