NSK Endomate TC2 Endomotor With MPAS F10 R Handpiece

Features
Ergonomic design and compact body
6 position type head for adjustable direction of the contra-angle head
Large ON/OFF key for enhanced operability
Approx. 1.2 hour continuous operation at rated load
Liquid crystal panel for user friendliness
Memory for up to 5 programs
Auto reverse function based on load conditions
Multiple functions available, including AUTO REVERSE, AUTO STOP, and AUTO REVERSE OFF
Ability to combine functions with nine different operation programs
DescriptionNSK Endomate TC2 Endomotor with MPAS F10 R Handpiece is a highly advanced and reliable dental tool designed to assist with endodontic procedures. This system offers a wide range of important features that ensure precise and efficient treatment. The Endomate TC2 Endomotor combines ergonomic design and a compact body, providing exceptional comfort and maneuverability for clinicians. Its lightweight construction allows for extended use without causing fatigue or discomfort. The MPAS F10 R Handpiece is specifically designed for endodontic applications, offering exceptional durability and control. Its contra-angle head can be easily adjusted to six different positions, allowing for optimal access and visibility during procedures.
The Endomate TC2 Endomotor features a user-friendly interface with a liquid crystal display panel that provides clear and intuitive information. The memory function allows for the storage of up to five different treatment programs, enabling personalized settings for various cases. With its powerful and reliable motor, the Endomate TC2 operates continuously for approximately 1.2 hours at the rated load, ensuring consistent performance throughout demanding procedures.Key Specifications

Max. torque
4 Ncm (when using 20:1 head)

Speed range
100-2,250 min-1 (With 20:1, 16:1, 10:1, 4:1 geared heads)

Charge/continuous use
90 min/1.2h (depending on workload)

Packaging
1 x MPAS -F10R Handpiece
1 x ENDO-MATE TC2 Motor
1 x Battery Charger?
1 x Power Cord
Direction to Use

Power On:

Ensure the device is connected to a power source.
Hold down the POWER key for more than one second to turn on the power.
The LCD panel should light up, indicating that the power is activated.

Program Selection:

Hold down the PROGRAM key until the desired program number is displayed on the LCD panel.
There are five programs available, numbered from 1 to 5.
Select the appropriate program based on the specific treatment requirements.

Adjusting Set Values:

Press the SELECT key to change the set values for parameters such as speed, torque, gear ratio, or auto-reverse.
Use the UP/DOWN key to adjust the set value for the selected parameter.
Ensure that the values are within the desired range and suitable for the specific procedure.

Mounting and Removing Files:

To mount a file, insert it into the contra angle head and lightly turn it until it engages with the latch mechanism.
Push the file inward until you hear a click, indicating that it is securely mounted.
To remove a file, depress the push-key located on the contra angle head and gently pull out the file.

Calibration (Optional):

If desired, the calibration function can be performed to minimize rotation speed fluctuation and torque differences.
Follow the specific instructions provided for calibration, including lubricating the contra-angle head and initiating the calibration process.

Power Off:

To turn off the power, hold down the POWER key for more than one second.
The LCD display will turn off, indicating that the power is deactivated.