- Reaction between o-phosphoric acid and mineral components of the tooth causes matt enamel and increasing of adhesiveness perfect gel consistency and thixotropic properties (gel becomes fluid during applying and coagulates just after application).
- Does not flow from the surface and narrow edges of enamel.
- Very good adhesion to enamel.
- Easy to rinse.
- Blue colour enables precision apply and control during application and etching.
Description
BLUE ETCH is used for etching dentin and enamel prior to composites, fissures and cavity seals.
Product is considered by the dentists and orthodontists to be the best Polish etching gel.
Comfort of use and application security :-
As one of the few world manufactures we use a system (adapter) for pumping the product from a big dosing syringe into the small one. It enables in 100% to use thixotropic advantages of etching gel. Implementation of the best quality three-element syringes of luer-lock type (with thread) guarantees safe pumping of preparation from one syringe into the other one. The connector located between syringes makes a tight connection during pumping of the preparation, making the work save and comfortable.
The high-quality, three-piece luer-lock threaded syringes in which our preparations are packaged ensure the full comfort and precision of the application. The luer lock thread allows easy and convenient connection of the syringe with the needle, by screwing it on the syringe. This is the best protection against unintentional spillage of the preparation during application. The rubber ring provides excellent control and smooth movement when applying the product.
COMPOSITION :-
- O-phosphoric acid 36%
- Gel base
- Dyestuff
INDICATION :-
- Used for etching dentin and enamel prior to composites, fissures and cavity seals.
Key Specifications
COMPOSITION :-
- O-phosphoric acid 36%
- Gel base dye stuff Store in original packaging at temperature below 25° C.
- Store out of reach of children.
Packaging
- 1 x 50ml Syringe
- Set Of Applicators
- Set Of Dispensers
- Connector
Direction to Use
- Step 1
Before the treatment immerse attached applicator into the spirit (ethyl alcohol) and then place it onto the syringe.
- Step 2
Prepare the cavity.
- Step 3
Apply a thin layer of the etchant onto the dried surface. Etch no longer than 60 seconds.
- Step 4
Rinse with strong air-flow and water (for about 15-20 seconds). Do not dry too much.
- Step 5
In case of enamel impurities repeat the process.
Note :- Product intended for multiple use except the applicator which is for single use only. Multiple use of applicator may cause the risk of reinfection
Reviews
There are no reviews yet.