Ammdent LC GI Line

LC GI LINE is a light cure, radiopaque resin-based glass-ionomer liner for light cure composites.

INDICATION :-

• Used as the lining of cavities for following filling procedures.
• Used as the lining of cavities to improve marginal behavior.
• Used for cavity lining (base ) for direct/Indirect pulp capping especially under Composites.

ADVANTAGE :-

• Allows minimal cavity preparation.
• Less stress on margins and marginal seal.
• Protects against secondary caries.
• Excellent esthetics and finish.
• Ease of color match to tooth shade.
• More durable.

Features :-

• High resistance.
• Excellent adhesion.
• High Compressive Strength.
• Very Stable.
• Excellent Biocompatibility.
• Chemical bond to the tooth structure.
• High fluoride release.
• Smaller particles
• Higher filler loading.
• Low solubility
• Long term clinical data

STORAGE : 

• Do not store above 25°C(78°F).
• Cool storage prolongs shelf life.

ADDITIONAL NOTES :-

• Do not use any resin to adjust the viscosity of the LC GI LINE.
• Do neither store the composite material in proximity of eugenol containing products, nor let the composite allow coming into contact with materials containing eugenol.
• Eugenol can impair the hardening of the composite and cause discoloration.
• Avoid contact of resin pastes with skin, especially by anyone having known resin allergies.

• 1 x 2gm Syringe

STEP – 1 

• Clean and dry the cavity. Remove the cap from the LC GI LINE-syringe and attach a needle tip. Squeeze out the first small drop on a pad to ensure the safe handling of LC GI LINE.

STEP – 2

• Before applying LC GI LINE paste of a radiopaque calcium hydroxide liner,e.g.CALCIUM HYDROXIDE LINE in areas in the proximity of the pulp(pulp protection)is recommended.

STEP – 3

• Dentin should be primed with a suitable dentin priming agent.

STEP – 4 

• Apply then LC GI LINE in a thin layer until the desired thickness is reached.

STEP – 5 

• Light cure LC GI LINE for 40 seconds.

STEP – 6 

• Do not apply to the cavity edges and remove any paste sticking to them.

STEP – 7

• Then proceed with light cure composites,e.g.LC NANOFIL.