Woodpecker Dental Air Polisher AP-H

Features
The subgingival nozzle can be rotated 360 after installation. By adjusting different angles, it can clean the lingual side, labial side, and adjacent space. Enable more comprehensive subgingival periodontal air polishing.
Pre-bendable subgingival nozzle design makes it easy to clear dead ends.
Subgingival nozzle with three directions for powder and one for water output The minimum size is only 0.25mm.
Efficiently eliminate biofilms.
Thoroughly clear dead ends.
User-friendly design.
Lat?ral transparent powder container enables easier observation of remaining powder.
DescriptionAir polishing is a process of using compressed air to spray powder and water on the tooth surface through air-polishing equipment to remove the attachments (such as biofilm, pigment, soft dirt, etc.) and polish the tooth surface. Air polishing has become an indispensable tool for biofilm control in the new era. Compared with traditional ultrasonic scaling, air polishing is more efficient and comfortable, causing no scratch to the tooth surface, and is less likely to harm soft tissues, so as to reduce patient tension.
Woodpecker Dental Air Polisher AP-H:

Comfortable clean lightweight easy cleaning mode.

With national patent design More scientific More efficient:

Supragingival & subgingival mode Two-in-one.
Amazing dental air polisher with subgingival mode.

0.7mm small-caliber nozzle More concentrated powder output More accurate scaling:

0.7mm Nozzle caliber for powder measures 0.7mm 1.4mm Nozzle caliber for water measures 1.4mm Smaller caliber allows for more concentrated air-polishing Companies on the market with dental air polisher of 0.7mm small-caliber nozzle include Woodpecker, EMS, and NSK.

Three-section air-polishing handpiece design:

Detachable handpiece.
Woodpecker handpiece can be detached for maintenance if a clog occurs, which makes it unique among all the brands.

360 rotatable Pre-bendable subgingival nozzle:

Three-direction powder output One-direction water output Efficiently eliminate biofilmsThoroughly clear dead ends.

User-friendly design:

A lateral transparent powder container enables easier observation of the remaining powder.

Ergonomic design More flexible and lightweight:

Easy quick connection for plugging and using The lightweight design relieves grip fatigue.
Suitable for all dental chairs The whole device weights about 125g, much lower than similar products on the market (135-165g) Easy to adjust the angle, flexible to apply to use.

The Black and gold color design contributes to a more fantastic appearanceKey Specifications
Input water pressure: 0.7bar to 2.2bar (70-220kPa)
Input air pressure: 3.5bar to 4.5bar (350-450kPa)
Working mode: continuous operation, Intermittent operation?
Weight: About 0.150kg
Connector: Meets the requirements of YY / T 0514

Operation environment:

Environment temperature: ? 10?? +40??
Relative humidity: 30% ? 75%
Atmospheric pressure?50kPa ? 106kPa
PackagingPackaging List:

1 x Powder storage chamber (Main Unit)
1 x Handpiece (AP-1)
1 x Needle (Long)
1 x Needle (Short)
1 x O-Ring needle
1 x Warranty card
1 x Instruction manual
1 x Tip card
10 x Nozzle
1 x Nozzle wrench
1 x Super Pro 200Gm powder bottel
1 x Gentle 200gm?powder bottel
1 x?Fast 300gm powder bottel

O-Ring Set

2 x O-Ring (?4.5x?1)
1 x O-Ring (?34.5x?1.8)
4 x?O-Ring (?4x?1)
1 x Sealing gasket
1 x Butt joint sleeve
Direction to UseInstallation and connection:

The connection between Dental Air Polisher and handpiece pipeline.
After drying the Dental Air Polisher interface and the handpiece pipeline-interface with an air gun, directly insert the Dental Air Polisher interface into the handpiece pipeline and then tighten the nut of the pipeline.

Powder Loading:

After connecting the Dental Air Polisher, unscrew the powder storage chamber cover of the gun, put the powder into the chamber, clear the powder at the thread position of the powder storage chamber cover, and 12 then tighten the cover.

Supragingival air-polishing:

After loading the powder, please spray in the container outside the oral cavity for 1~3 seconds in advance to ensure that the air and water can be sprayed evenly before treating the patient.
Generally, the handpiece is held in a pen-holding position.
When using a Dental Air Polisher for normal air polishing, it is recommended that the spray-head air outlet and the tooth surface be kept at a distance of 3-5mm, and the air polishing direction is recommended to be at an angle of 30-60? with the tooth surface.

Subgingival air polishing:

Install an accessory nozzle before use. Screw-in the nozzle to the top of the subgingival handpiece, and then tighten the nozzle with a wrench.
After loading the powder, please spray in the container outside the oral cavity for 1~3 seconds in advance to ensure that the air and water can be sprayed evenly before treating the patient.
Generally, the handpiece is held in a pen-holding position.
4 When using the subgingival handpiece for normal subgingival air polishing, it is recommended to use a nozzle to remove the biofilm in the periodontal pocket at subgingival 4-9mm, and perform up and down motion for scaling.
The air-polishing time of each periodontal pocket is recommended for no more than 5 seconds.
6 Please ensure that the handpiece has a normal waterway before use. Adjust the water flow and air pressure of the main unit to an appropriate level according to the conditions of biofilm or pigment when scaling. Do not spend too much time in local air-polishing when scaling.

Note:

It is forbidden to pull out the tail plug when the handpiece is working.
The only subgingival powder can be used for subgingival air polishing.

Instructions for main components:

Handpiece: Working part, the spray head of which can be pulled out by rotation. In case of blockage, the user can rotate the spray head to loosen and pull out it, and then use the needle to negotiate. The spray head can be sterilized at high temperatures.

Powder storage chamber:

Working part, used for powder storage.
Nozzle: Disposable accessory.

Maintenance:
Powder clearing

Open the powder storage chamber cover and clear the remainingpowder on it.
Blow off the powder remaining in the powder storage chamber with air.
Wipe off the powder residues on the surface of the Dental Air Polisher with alcohol cotton or a dry towel.