Dentsply Prisma Gloss Polishing Paste

• Easy to use
• Can be rinsed completely from the teeth without leaving a residue or film.
• Improves the smoothness of the finished surface of restorations.
• High-gloss finish
• Minimizes surface roughness
• Reduces surface staining

Prisma Gloss Composite Polishing Pastes are water-soluble, aluminum oxide pastes designed for the final polishing of anterior and posterior composite restorations, diastema closures, esthetic incisal lengthenings, or veneers.

INDICATIONS

• It is designed for the final polishing of composite restorations or veneers.

ADVANTAGES

• Effective smoothening.
• Creates high luster on composite restorations.
• Water-soluble.
• Syringe delivery.

• Material: Polishing paste
• Composition: Silicon dioxide, glycerin, water, sorbitol, flavor, sodium lauryl sulfate, sodium hydroxide, sodium fluoride
• Particle size: 1.0 µm
• Indications: For polishing-composite, ceramic restorations, veneers, inlays, onlays and crowns
• Color: White
• Flavor: Mint

• 1 x 4g Syringe

• Prepare the restoration: Ensure that the composite or ceramic restoration is clean and dry before polishing.
• Apply the polishing paste: Apply a small amount of the polishing paste to the surface of the restoration. Use a rubber cup or polishing brush to spread the paste evenly over the surface.
• Polish the restoration: Run the rubber cup or polishing brush over the surface of the restoration at low speed (10,000 to 12,000 rpm). Apply light pressure and continue polishing for approximately 10-20 seconds.
• Rinse and dry: Rinse the restoration thoroughly with water to remove any excess polishing paste. Dry the restoration with air or a gentle stream of water.
• Evaluate the results: Check the restoration to ensure that the desired level of gloss has been achieved.