Super Endo Composite & Porcelain Finishing Bur Kit

Designed for putting the finishing touches on direct dental composite restorations, composite finishing and bur sets feature a sequence of burs and polishers designed to bring out a lustrous finish. These sets can include any number of different shapes, but they are designed to be used in sequence from the roughest bur to the finest. They provide a convenient way to keep the finishing and polishing process organized and simple.

Features :-

This kit is suitable for finishing direct resin as well as glass ionomer restorations
Designed for finishing interproximal and subgingival composite fillings.
Fast and efficient contouring.
Fine finishing.

Key Specifications :-

Autoclavable and cost-effective.
Package Dimensions : 4.4 x 3.5 x 2.4 inches

Set Of 11 Piece :-

1 x TR-11EF
1 x BR-40EF
1 x EX-21EF
1 x TF-11EF
1 x TC-11EF
1 x FO-40EF
1 x FO-30EF
1 x TF-12EF
1 x FO-20EF
1 x FO-25EF
1 x FO-42EF

Packaging :-

1 X SuperEndo Composite & Porcelain Finishing Bur Kit (11Burs)

Direction to Use :-

Insert the instrument as deeply as possible into the chuck (Friction Grip).
Set the handpiece at the required working speed before applying the instrument to the treated area.
Apply a maximum operating force of 0.4 [N] and do not exceed a speed of 230’000 [rpm].
Activate water spray during the entire treatment (minimum 50 mL/min).
Regulate water flow in case of water excess or shortage.
It is recommended to use a dental dam.
Use the instruments over the entire length of their working part and not just at the tip, so as to avoid an unconscious increase of the contact pressure causing local overheating.
Once the preparation has been completed, remove the instrument from the site and allow it to come to a standstill.
It is recommended to wear gloves and safety glasses.

-38%